CATALOG 2024 Specifics and details are symbolic. We reserve the right to make changes without prior notice.
3858889550058 3858889550041 3858889550034 3858889550027 GKS 01 A Item number TYPE MATERIAL 011101 GKS 01 A Cu 011102 GKS 01 A AiSi 011103 GKS 01 A AiSi - 4 011104 GKS 01 A K 011105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu 3858889550065 3858889550102 3858889550096 3858889550089 3858889550072 CROSS CONNECTOR 58X58/3 plates - round conductor indent x 2 GKS 01 AA Item number TYPE MATERIAL 012101 GKS 01 AA Cu 012102 GKS 01 AA AiSi 012103 GKS 01 AA AiSi - 4 012104 GKS 01 AA K 012105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550119 3858889550157 3858889550140 3858889550133 3858889550126 CROSS CONNECTOR 58X58/3 plates - round conductor indent GKS 01/16 A Item number TYPE MATERIAL 012150 GKS 01/16 A Cu 012151 GKS 01/16 A AiSi 012152 GKS 01/16 A AiSi - 4 012153 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889552397 3858889552427 3858889552410 3858889552403 01/2024 www.vedris.hr CROSS CONNECTOR 58X58/3 plates - round conductor indent GKS 01 Item number TYPE MATERIAL 010101 GKS 01 Cu 010102 GKS 01 AiSi 010103 GKS 01 AiSi - 4 010104 GKS 01 K 010105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550010 CROSS CONNECTOR 58X58/3 plates EAN barcode 40,00 58,00 58,00 40,00 58,00 58,00 40,00 58,00 58,00 40,00 58,00 58,00 Ø16,00 The cross connector, type GKS 01, is intended for connecting flat conductors up to 30 mm in width. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01 A, is intended for connecting flat conductors up to 30 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01 AA, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01/16 A, is intended for connecting flat conductors up to 30 mm in width and round conductors with a Ø 16 mm diameter. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, and four M8 nuts. It is manufactured in accordance with regulations and standards.
02/2024 www.vedris.hr CROSS CONNECTOR 58X58/2 plates - round conductor indent x 2 GKS 01/2 A Item number TYPE MATERIAL 014101 GKS 01/2 A Cu 014102 GKS 01/2 A AiSi 014103 GKS 01/2 A AiSi - 4 014104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550201 3858889550232 3858889550225 3858889550218 GKS 01/2 AA Item number TYPE MATERIAL 015101 GKS 01/2 AA Cu 015102 GKS 01/2 AA AiSi 015103 GKS 01/2 AA AiSi - 4 015104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550249 3858889550270 3858889550263 3858889550256 CROSS CONNECTOR 58X58/2 plates - round conductor indent CROSS CONNECTOR 58X58/2 plates GKS 01/2 MATERIAL 013101 GKS 01/2 Cu 013102 GKS 01/2 AiSi 013103 GKS 01/2 AiSi - 4 013104 Fe Zn Cu AiSi AiSi - 4 3858889550164 3858889550195 3858889550188 3858889550171 Item number TYPE EAN barcode GKS 01/16 AA Item number TYPE MATERIAL 012200 GKS 01/16 AA Cu 012201 GKS 01/16 AA AiSi 012202 GKS 01/16 AA AiSi - 4 012203 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889552434 3858889552465 3858889552458 3858889552441 CROSS CONNECTOR 58X58/3 plates - round conductor indent x 2 40,00 58,00 58,00 Ø16,00 40,00 58,00 58,00 40,00 58,00 58,00 40,00 58,00 58,00 The cross connector type, GKS 01/16 AA, is intended for connecting round conductors with a Ø 16 mm diameter and conductors with diameters ranging from Ø 8 to Ø12 mm. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01/2, is intended for connecting flat conductors up to 30 mm in width. It consists of two plates with dimensions 58mm x 58 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01/2 A, is intended for connecting flat conductors up to 30 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions 58 mm x 58 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01/2 AA, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions 58mm x 58 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards.
3858894840038 3858894840021 38 85 894840014 GKS 01 V A Item number TYPE MATERIAL 015301 GKS 01 V A AiSi 015302 GKS 01 V A AiSi - 4 015303 GKS 01 V A K 015304 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu 3858894840045 3858894840076 3858894840069 3858894840052 03/2024 www.vedris.hr CROSS CONNECTOR 58X58/3 plates - round conductor indent GKS 01 V Item number TYPE MATERIAL 015201 GKS 01 V AiSi 015202 GKS 01 V AiSi - 4 015203 GKS 01 V K 015204 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840007 CROSS CONNECTOR 58X58/3 plates EAN barcode 3858894840113 3858894840106 3858894840090 GKS 01 MT A Item number TYPE MATERIAL 015501 GKS 01 MT A AiSi 015502 GKS 01 MT A AiSi - 4 015503 GKS 01 MT A K 015504 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840120 3858894840151 3858894840144 3858894840137 CROSS CONNECTOR 58X58/3 plates - round conductor indent GKS 01 MT Item number TYPE MATERIAL 015401 GKS 01 MT AiSi 015402 GKS 01 MT AiSi - 4 015403 GKS 01 MT K 015404 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840083 CROSS CONNECTOR 58X58/3 plates 58,00 58,00 M8X30 58,00 58,00 M8X30 58,00 58,00 M8 58,00 58,00 M8 NEW! NEW! NEW! NEW! The cross connector, type GKS 01 V, is intended for connecting flat conductors up to 30 mm in width and for potential equalization. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, four M8 nuts, and a welded M8 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01 V A, is intended for connecting flat conductors up to 30 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, four M8 nuts, and a welded M8 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01 MT, is intended for connecting flat conductors up to 30 mm in width and for potential equalization. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, four M8 nuts, and a welded M8 nut. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 01 MT A, is intended for connecting flat conductors up to 30 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 58 mm x 58 mm, four M8 screws, four M8 nuts, and a welded M8 nut. It is manufactured in accordance with regulations and standards.
04/2024 www.vedris.hr CROSS CONNECTOR 80X80/3 plates GKS 02 Item number TYPE MATERIAL 016101 GKS 02 AiSi 016102 GKS 02 AiSi-4 016103 GKS 02 K 016104 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550287 3858889550317 3858889550300 3858889550294 CROSS CONNECTOR 80X80/3 plates - round conductor indent GKS 02 A Item number TYPE MATERIAL 017101 GKS 02 A Cu 017102 GKS 02 A AiSi 017103 GKS 02 A AiSi - 4 017104 GKS 02 A K 017105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550331 3858889550379 3858889550362 3858889550355 3858889550348 60,00 80,00 80,00 60,00 80,00 80,00 CROSS CONNECTOR 80X80/2 plates - round conductor indent GKS 02/2 Item number TYPE MATERIAL 018101 GKS 02/2 AiSi 018102 GKS 02/2 AiSi - 4 018103 Fe Zn AiSi AiSi - 4 EAN barcode 3858889550393 3858889550416 3858889550409 GKS 02/2 A Item number TYPE MATERIAL 019101 GKS 02/2 A Cu 019102 GKS 02/2 A AiSi 019103 GKS 02/2 A AiSi - 4 019104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550430 3858889550461 3858889550454 3858889550447 CROSS CONNECTOR 80X80/2 plates 60,00 80,00 80,00 60,00 80,00 80,00 The cross connector, type GKS 02, is intended for connecting flat conductors up to 45 mm in width. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02 A, is intended for connecting flat conductors up to 45 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02/2, is intended for connecting flat conductors up to 45 mm in width. It consists of two plates with dimensions of 80 mm x 80 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02/2 A, is intended for connecting flat conductors up to 45 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions of 80 mm x 80 mm, four M8 screws and four M8 nuts. It is manufactured in accordance with regulations and standards.
3858894840199 3858894840182 3858894840175 GKS 02 V A Item number TYPE MATERIAL 019301 GKS 02 V A AiSi 019302 GKS 02 V A AiSi - 4 019303 GKS 02 V A K 019304 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840205 3858894840236 3858894840229 3858894840212 05/2024 www.vedris.hr CROSS CONNECTOR 80X80/3 plates - round conductor indent GKS 02 V Item number TYPE MATERIAL 019201 GKS 02 V AiSi 019202 GKS 02 V AiSi - 4 019203 GKS 02 V K 019204 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840168 CROSS CONNECTOR 80X80/3 plates 3858894840274 3858894840267 3858894840250 GKS 02 MT A Item number TYPE MATERIAL 019501 GKS 02 MT A AiSi 019502 GKS 02 MT A AiSi - 4 019503 GKS 02 MT A K 019504 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840281 3858894840311 3858894840304 3858894840298 CROSS CONNECTOR 80X80/3 plates - round conductor indent GKS 02 MT Item number TYPE MATERIAL 019401 GKS 02 MT AiSi 019402 GKS 02 MT AiSi - 4 019403 GKS 02 MT K 019404 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840243 CROSS CONNECTOR 80X80/3 plates 80,00 80,00 M10X30 80,00 80,00 M10X30 80,00 80,00 M10 80,00 80,00 M10 NEW! NEW! NEW! NEW! The cross connector, type GKS 02 V, is intended for connecting flat conductors up to 45 mm in width and for potential equalization. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws, four M8 nuts, and a welded M8 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02 V A, is intended for connecting flat conductors up to 45 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws, four M8 nuts, and a welded M8 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02 MT, is intended for connecting flat conductors up to 45 mm in width and for potential equalization. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws, four M8 nuts, and a welded M8 nut. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 02 MT A, is intended for connecting flat conductors up to 45 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 80 mm x 80 mm, four M8 screws, four M8 nuts, and a welded M8 nut. It is manufactured in accordance with regulations and standards.
06/2024 www.vedris.hr CROSS CONNECTOR 48X48/3 plates CROSS CONNECTOR 48X48/3 plates - round conductor indent GKS 03 A Item number TYPE MATERIAL 021101 GKS 03 A Cu 021102 GKS 03 A AiSi 021103 GKS 03 A AiSi - 4 021104 GKS 03 A K 021105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550539 3858889550577 3858889550560 3858889550553 3858889550546 GKS 03 Item number TYPE MATERIAL 020101 GKS 03 Cu 020102 GKS 03 AiSi 020103 GKS 03 AiSi - 4 020104 GKS 03 K 020105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550485 3858889550522 3858889550515 3858889550508 3858889550492 32,00 48,00 48,00 32,00 48,00 48,00 CROSS CONNECTORX48/2 plates GKS 03/2 Item number TYPE MATERIAL 023101 GKS 03/2 Cu 023102 GKS 03/2 AiSi 023103 GKS 03/2 AiSi - 4 023104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550638 3858889550669 3858889550652 3858889550645 CROSS CONNECTOR 48X48/3 plates - round conductor indent x 2 GKS 03 AA Item number TYPE MATERIAL 022101 GKS 03 AA Cu 022102 GKS 03 AA AiSi 022103 GKS 03 AA AiSi - 4 022104 GKS 03 AA K 022105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550584 3858889550621 3858889550614 3858889550607 3858889550591 32,00 48,00 48,00 32,00 48,00 48,00 The cross connector, type GKS 03, is intended for connecting flat conductors up to 25 mm in width. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03 A, is intended for connecting flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03 AA, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03/2, is intended for connecting flat conductors up to 25 mm in width. It consists of two plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards.
07/2024 www.vedris.hr CROSS CONNECTOR 48X48/2 plates - round conductor indent CROSS CONNECTOR 48X48/2 plates - round conductor indent x 2 GKS 03/2 AA Item number TYPE MATERIAL 025101 GKS 03/2 AA Cu 025102 GKS 03/2 AA AiSi 025103 GKS 03/2 AA AiSi - 4 025104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550713 3858889550744 3858889550737 3858889550720 GKS 03/2 A Item number TYPE MATERIAL 024101 GKS 03/2 A Cu 024102 GKS 03/2 A AiSi 024103 GKS 03/2 A AiSi - 4 024104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550676 3858889550706 3858889550690 3858889550683 32,00 48,00 48,00 32,00 48,00 48,00 The cross connector, type GKS 03/2 A, is intended for connecting flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03/2 AA, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions of 48 mm x 48 mm, four M6 screws and four M6 nuts. It is manufactured in accordance with regulations and standards.
3858894840359 3858894840342 3858894840335 GKS 03 V A Item number TYPE MATERIAL 025301 GKS 03 V A AiSi 025302 GKS 03 V A AiSi - 4 025303 GKS 03 V A K 025304 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu 3858894840366 3858894840397 3858894840380 3858894840373 08/2024 www.vedris.hr CROSS CONNECTOR 48X48/3 plates - round conductor indent GKS 03 V Item number TYPE MATERIAL 025201 GKS 03 V AiSi 025202 GKS 03 V AiSi - 4 025203 GKS 03 V K 025204 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840328 CROSS CONNECTOR 48X48/3 plates EAN barcode 3858894840434 3858894840427 3858894840410 GKS 03 MT A Item number TYPE MATERIAL 025501 GKS 03 MT A AiSi 025502 GKS 03 MT A AiSi - 4 025503 GKS 03 MT A K 025504 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu 3858894840441 3858894840472 3858894840465 3858894840458 CROSS CONNECTOR 48X48/3 plates - round conductor indent GKS 03 MT Item number TYPE MATERIAL 025401 GKS 03 MT AiSi 025402 GKS 03 MT AiSi - 4 025403 GKS 03 MT K 025404 Fe Zn AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858894840403 CROSS CONNECTOR 48X48/3 plates EAN barcode 48,00 48,00 M6X20 48,00 48,00 M6X20 48,00 48,00 M8 48,00 48,00 M8 NEW! NEW! NEW! NEW! The cross connector, type GKS 03 V, is intended for connecting flat conductors up to 25 mm in width and for potential equalization. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws, four M6 nuts, and a welded M6 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03 V A, is intended for connecting flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws, four M6 nuts, and a welded M6 screw. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03 MT, is intended for connecting flat conductors up to 25 mm in width and for potential equalization. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws, four M6 nuts, and a welded M6 nut. It is manufactured in accordance with regulations and standards. The cross connector, type GKS 03 MT A, is intended for connecting flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm, and for potential equalization. It consists of three plates with dimensions of 48 mm x 48 mm, four M6 screws, four M6 nuts, and a welded M6 nut. It is manufactured in accordance with regulations and standards.
09/2024 www.vedris.hr CONNECTOR FOR REINFORCEMENT BARS GKS 06 Item number TYPE MATERIAL 026301 Fe Zn EAN barcode 3858889550799 CROSS CONNECTOR 40X40/2 plates - round conductor indent x 2 GKS 04 Item number TYPE MATERIAL 026101 GKS 04 Cu 026102 GKS 04 AiSi 026103 GKS 04 AiSi - 4 026104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550751 3858889550782 3858889550775 3858889550768 40,00 40,00 CONNECTOR FOR ROUND CONDUCTORS Ø 8 mm - Ø 10 mm Item number TYPE MATERIAL GKS 045 AiSi 026131 GKS 045 AiSi - 4 026132 AiSi AiSi - 4 EAN barcode 3858889559488 3858889559471 GKS 061 026302 Fe Zn 3858894840489 GKS 062 026303 Fe Zn 3858894840496 L ØD GKS 06 Item number TYPE Width (L) / mm 026301 32 Diameter (D) / mm - 14 GKS 061 026302 42 14 - 22 GKS 062 026303 47 22 - 36 NEW! The cross connector, type GKS 04, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 10 mm. It consists of two plates with dimensions of 40 mm x 40 mm, one M10 screw, and an M10 nut. It is manufactured in accordance with regulations and standards.. The connector, type GKS 045, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 10 mm. It is manufactured in accordance with regulations and standards. Connectors for reinforcement bars, types GKS 06, 061, and 062, are intended for connecting flat conductors up to 45 mm in width and reinforcing steel bars with a diameter of up to Ø 36 mm in concrete. They consist of a bracket and an M10 x 30 screw. It is manufactured in accordance with regulations and standards.
10/2024 www.vedris.hr CONNECTOR FOR CONDUCTOR ATTACHMENT ONTO METAL PARTS - flat CONNECTOR FOR CONDUCTOR ATTACHMENT ONTO METAL PARTS - flat - round conductor indent GKS 072 A Item number TYPE MATERIAL 026701 GKS 072 A Cu 026702 GKS 072 A AiSi 026703 GKS 072 A AiSi - 4 026704 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889554407 3858889554438 3858889554421 3858889554414 GKS 072 Item number TYPE MATERIAL 026601 GKS 072 Cu 026602 GKS 072 AiSi 026603 GKS 072 AiSi - 4 026604 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889554322 3858889554391 3858889554384 3858889554377 10,40 42,00 58,00 58,00 30,00 20,00 10,40 58,00 58,00 CONNECTOR FOR CONDUCTOR ATTACHMENT ONTO METAL PARTS - round conductor indent GKS 071 A Item number TYPE MATERIAL 026511 GKS 071 A Cu 026512 GKS 071 A AiSi 026513 GKS 071 A AiSi - 4 026514 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889554285 3858889554315 3858889554308 3858889554292 20,00 10,40 33,00 CONNECTOR FOR CONDUCTOR ATTACHMENT ONTO METAL PARTS GKS 071 Item number TYPE MATERIAL 026411 GKS 071 Cu 026412 GKS 071 AiSi 026413 GKS 071 AiSi - 4 026414 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889554247 3858889554278 3858889554261 3858889554254 33,00 20,00 42,00 58,00 10,40 The connector, type GKS 071, is intended for connecting flat conductors up to 30 mm in width to metal parts. It consists of a footing and a plate with a width of 58 mm, three M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GKS 071 A, is designed for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm to metal parts. It consists of a footing and a plate with dimensions of 58 mm in width, three M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GKS 072, is intended for connecting flat conductors up to 30 mm in width to metal parts. It is composed of a footing and a plate with a width of 58 mm, three M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GKS 072 A, is designed for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm to metal parts. It consists of a footing and a plate with dimensions of 58 mm in width, three M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
11/2024 www.vedris.hr GS 01 Item number TYPE MATERIAL 027101 GS 01 Cu 027102 GS 01 AiSi 027103 GS 01 AiSi - 4 027104 GS 01 K 027105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550881 CONNECTOR 58X25/3 plates 3858889550928 3858889550911 3858889550904 3858889550898 CONNECTOR 58X25/3 plates - round conductor indent GS 01 A Item number TYPE MATERIAL 028101 GS 01 A Cu 028102 GS 01 A AiSi 028103 GS 01 A AiSi - 4 028104 GS 01 A K 028105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550935 3858889550973 3858889550966 3858889550959 3858889550942 CONNECTOR 58X25/2 plates GS 01/2 Item number TYPE MATERIAL 029101 GS 01/2 Cu 029102 GS 01/2 AiSi 029103 GS 01/2 AiSi - 4 029104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550980 3858889551017 3858889551000 3858889550997 42,00 58,00 25,00 42,00 58,00 25,00 42,00 58,00 25,00 CONNECTOR 58X25 A / 45° - 45° angle round conductor indent GS 01 A / 45 Item number TYPE MATERIAL 028151 GS 01 A / 45 Cu ° 028152 GS 01 A / 45 AiSi ° 028153 GS 01 A / 45 AiSi - 4 ° 028154 GS 01 A / 45 K ° 028155 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889559495 3858889559532 3858889559525 3858889559518 3858889559501 ° The connector, type GS 01, is intended for contact connection of flat conductors up to 35 mm in width. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01 A, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01 A / 45°, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm at a 45° angle. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01/2, is intended for contact connection of flat conductors up to 35 mm in width. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
12/2024 www.vedris.hr GS 02 Item number TYPE MATERIAL 031101 GS 02 Cu 031102 GS 02 AiSi 031103 GS 02 AiSi - 4 031104 GS 02 K 031105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551062 CONNECTOR 48X20/3 plates 3858889551109 3858889551093 3858889551086 3858889551079 CONNECTOR 48X20/3 plates - round conductor indent GS 02 A Item number TYPE MATERIAL 032101 GS 02 A Cu 032102 GS 02 A AiSi 032103 GS 02 A AiSi - 4 032104 GS 02 A K 032105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551116 3858889551154 3858889551147 3858889551130 3858889551123 20,00 32,00 48,00 32,00 48,00 20,00 CONNECTOR 58X25/2 plates - round conductor indent GS 01/2 A Item number TYPE MATERIAL 030101 GS 01/2 A Cu 030102 GS 01/2 A AiSi 030103 GS 01/2 A AiSi - 4 030104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889551024 3858889551055 3858889551048 3858889551031 42,00 58,00 25,00 CONNECTOR 58X25/2 A / 45° - 45° angle round conductor indent GS 01/2 A / 45° Item number TYPE MATERIAL 030151 GS 01/2 A / 45° Cu 030152 GS 01/2 A / 45° AiSi 030153 GS 01/2 A / 45° AiSi - 4 030154 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889559549 3858889559570 3858889559563 3858889559556 The connector, type GS 01/2 A, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01/2 A / 45°, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm at a 45° angle. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 02, is intended for contact connection of flat conductors up to 25 mm in width. It consists of three plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 02 A, is intended for contact connection of flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 10 mm. It consists of three plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
13/2024 www.vedris.hr CONNECTOR 48X20/2 plates - round conductor indent GS 02/2 A Item number TYPE MATERIAL 034101 GS 02/2 A Cu 034102 GS 02/2 A AiSi 034103 GS 02/2 A AiSi - 4 034104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858887951208 3858887951239 3858887951222 3858887951215 32,00 48,00 20,00 CONNECTOR 48X20/2 plates GS 02/2 Item number TYPE MATERIAL 033101 GS 02/2 Cu 033102 GS 02/2 AiSi 033103 GS 02/2 AiSi - 4 033104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889551161 3858889551192 3858889551185 3858889551178 32,00 48,00 20,00 The connector, type GS 02/2, is intended for contact connection of flat conductors up to 25 mm in width. It consists of two plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 02/2 A, is intended for contact connection of flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 10 mm. It consists of two plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
14/2024 www.vedris.hr GS 051 Item number TYPE MATERIAL 034411 Fe Zn EAN barcode 3858894840502 CONNECTOR 27,5 X 11,5 Ø10,00 M10 27,50 11,50 NEW! GS 04 AiSi - 4 Item number TYPE MATERIAL 034301 GS 04 Cu - AiSi - 4 034302 AiSi - 4 Cu - AiSi - 4 EAN barcode 3858889553301 CONNECTOR 33X20 with a footing 3858889553318 GS 05 AiSi - 4 Item number TYPE MATERIAL 034401 GS 05 Cu - AiSi - 4 034402 AiSi - 4 Cu - AiSi - 4 EAN barcode 3858889553325 CONNECTOR 33X20 3858889553332 The connector, type GS 04, is intended for contact connection of round conductors with diameters ranging from Ø 4 to Ø 10 mm to sheet metal masses. It consists of a clamp, a footing, an M10 screw, an M10 nut, and a Ø 10 mm washer. It is manufactured in accordance with regulations and standards. The connector, type GS 05, is intended for contact connection of round conductors with diameters ranging from Ø 4 to Ø 10 mm to metal masses. It consists of a clamp, an M10 screw, an M10 nut, and two Ø 10 mm washers. It is manufactured in accordance with regulations and standards. The connector, type GS 051, is intended for contact connection of round conductors with a diameter of Ø 10 mm to metal masses. It consists of a clamp, an M10 screw, and an M10 nut. It is manufactured in accordance with regulations and standards.
3858894840540 3858894840533 3858894840526 15/2024 www.vedris.hr GS 060/20 Item number TYPE MATERIAL 034421 GS 060/20 AiSi - 4 034422 GS 060/36 034423 GS 060/36 AiSi - 4 034424 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840519 CONNECTOR GS 060 3858894840588 3858894840571 3858894840564 GS 061/20 Item number TYPE MATERIAL 034431 GS 061/20 AiSi - 4 034432 GS 061/36 034433 GS 061/36 AiSi - 4 034434 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840557 CONNECTOR GS 061 3858894840625 3858894840618 3858894840601 GS 062/20 Item number TYPE MATERIAL 034441 GS 062/20 AiSi - 4 034442 GS 062/36 034443 GS 062/36 AiSi - 4 034444 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840595 CONNECTOR GS 062 3858894840663 3858894840656 3858894840649 GS 063/20 Item number TYPE MATERIAL 034451 GS 063/20 AiSi - 4 034452 GS 063/36 034453 GS 063/36 AiSi - 4 034454 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840632 CONNECTOR GS 063 9,00 1-20 / 18-36 20,00 80,00 M10X30 20,00 9,00 1-20/ 18-36 80,00 20,00 9,00 1-20/ 18-36 80,00 20,00 1-20 / 18/36 9,00 40,00 80,00 NEW! NEW! NEW! NEW! The connector, type GS 060, is intended for connecting conductors and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards. 2 The connector, type GS 061, is intended for connecting conductors from 12 to 80 mm and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards. 2 The connector, type GS 062, is intended for connecting conductors from 50 to 80 mm and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards. The connector, type GS 063, is intended for connecting flat conductors up to 30 mm in width and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards.
3858894840700 3858894840694 3858894840687 16/2024 www.vedris.hr GS 063 A / 20 Item number TYPE MATERIAL 034461 GS 063 A / 20 AiSi - 4 034462 GS 063 A / 36 034463 GS 063 A / 36 AiSi - 4 034464 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840670 CONNECTOR GS 063 A 3858894840748 3858894840731 3858894840724 GS 064 / 20 Item number TYPE MATERIAL 034471 GS 064 / 20 AiSi - 4 034472 GS 064 / 36 034473 GS 064 / 36 AiSi - 4 034474 Fe Zn AiSi - 4 Fe-Zn AiSi - 4 EAN barcode 3858894840717 CONNECTOR GS 064 3858894840762 GS 070 Item number TYPE MATERIAL 034501 GS 070 AiSi - 4 034502 Fe Zn AiSi - 4 EAN barcode 3858894840755 CONNECTOR GS 070 3858894840786 GS 071 Item number TYPE MATERIAL 034511 GS 071 AiSi - 4 034512 Fe Zn AiSi - 4 EAN barcode 3858894840779 CONNECTOR GS 071 9,00 1-20 / 18-36 20,00 80,00 58,00 9,00 1-20/ 18-36 20,00 80,00 60,00 40,00 70,00 120,00 Ø9,00 Ø7,00 70,00 40,00 120,00 Ø9,00 Ø7,00 NEW! NEW! NEW! NEW! 2 The connector, type GS 063 A, is intended for connecting conductors up to 120 mm and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards. The connector, type GS 064, is intended for connecting flat conductors up to 50 mm in width and metal masses with thicknesses ranging from 1 to 20 mm or 18 to 36 mm. It is manufactured in accordance with regulations and standards. 2 The connector, type GS 070, is intended for connecting metal masses and conductors from 12 to 80 mm . It is manufactured in accordance with regulations and standards. 2 The connector, type GS 071, is intended for connecting metal masses and conductors from 50 to 80 mm . It is manufactured in accordance with regulations and standards.
17/2024 www.vedris.hr GCS 01 Item number TYPE MATERIAL 035101 GCS 01 Cu 035102 GCS 01 AiSi 035103 GCS 01 AiSi - 4 035104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889551246 TUBULAR CONNECTOR Ø 17 X 80 3858889551277 3858889551260 3858889551253 GCS 02 Item number TYPE MATERIAL 035111 Fe Zn EAN barcode 3858894840793 ANGLED TUBULAR CONNECTOR Ø 17 X 80 Ø12.00 Ø12.00 80,00 NEW! The tubular connector, type GCS 01, is intended for connecting round conductors with diameters ranging from Ø 6 to Ø12 mm. It consists of a housing and four M6 screws. It is manufactured in accordance with regulations and standards. The tubular connector, type GCS 02, is intended for connecting round conductors with diameters ranging from Ø 6 to Ø12 mm at a desired angle. It is composed of two housings, four M6 screws, one M8 screw, and one M8 nut. It is manufactured in accordance with regulations and standards.
18/2024 www.vedris.hr GUTTER CONDUCTOR CLAMP GNTO 01 Item number TYPE MATERIAL 037101 GNTO 01 Cu 037102 GNTO 01 AiSi 037103 GNTO 01 AiSi - 4 037104 GNTO 01 K 037105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551284 3858889551321 3858889551314 3858889551307 3858889551291 GUTTER CONDUCTOR CLAMP - round conductor indent GUTTER CONDUCTOR CLAMP GNTO 01 A Item number TYPE MATERIAL 038101 GNTO 01 A Cu 038102 GNTO 01 A AiSi 038103 GNTO 01 A AiSi - 4 038104 GNTO 01 A K 038105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551338 3858889551376 3858889551369 3858889551352 3858889551345 GNTO 02 Item number TYPE MATERIAL 039101 GNTO 02 Cu 039102 GNTO 02 AiSi 039103 GNTO 02 AiSi - 4 039104 GNTO 02 K 039105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551383 3858889551420 3858889551413 3858889551406 3858889551390 32,00 48,00 42,00 58,00 42,00 58,00 GUTTER CONDUCTOR CLAMP - round conductor indent GNTO 02 A Item number TYPE MATERIAL 040101 GNTO 02 A Cu 040102 GNTO 02 A AiSi 040103 GNTO 02 A AiSi - 4 040104 GNTO 02 A K 040105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551437 3858889551475 3858889551468 3858889551451 3858889551444 32,00 48,00 The gutter conductor clamp, type GNTO 01, is intended for connecting flat conductors up to 35 mm in width and gutters. It consists of three plates with a width of 58 mm, two M8 screws, two M8 nuts, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The gutter conductor clamp, type GNTO 01 A, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 12 mm and gutters. It consists of three plates with a width of 58 mm, two M8 screws, two M8 nuts, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The gutter conductor clamp, type GNTO 02, is intended for connecting flat conductors up to 25 mm in width and gutters. It consists of three plates with a width of 48 mm, four M6 screws, and four M6 nuts. It is manufactured in accordance with regulations and standards. The gutter conductor clamp, type GNTO 02 A, is intended for connecting round conductors with diameters ranging from Ø 8 to Ø 10 mm and gutters. It consists of three plates with a width of 48 mm, four M6 screws, and four M6 nuts. It is manufactured in accordance with regulations and standards.
19/2024 www.vedris.hr SPACER Item number TYPE MATERIAL GZOT 01 Cu 041101 GZOT 01 AiSi 041102 GZOT 01 AiSi - 4 041103 Cu AiSi AiSi - 4 EAN barcode 3858889551505 3858889551499 3858889551482 WALL BRACKET Ø 6 X L WITH A SPACER GZNT 01/ 80 AiSi Item number TYPE MATERIAL 042101 GZNT 01/100 AiSi 042102 GZNT 01/120 AiSi 042103 GZNT 01/140 AiSi 042104 GZNT 01/160 AiSi 042105 AiSi EAN barcode 3858889551529 3858889551567 3858889551550 3858889551543 3858889551536 The spacer, type GZOT 01, is intended for mounting flat conductors vertically on concrete or wooden surfaces. It has an outer diameter of Ø 34 mm with a hole diameter of Ø 6.2 mm and a height of 12 mm. It is also used as a spacer on wall brackets. It is manufactured in accordance with regulations and standards. The wall bracket, type GZNT 01 / L, is intended for mounting flat conductors with a width of up to 30 mm on the wall. It is composed of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm, and a spacer type GZOT 01. It is manufactured in accordance with regulations and standards. RUBBER CAP - for round conductors with a diameter Ø 8 mm Item number TYPE MATERIAL GOP 01 041401 GUMA EAN barcode 3858889551512 The rubber cap, type GOP 01, is intended for mounting on a round conductor with a diameter of Ø 8 mm before entering the wall to prevent water from flowing along the conductor, thus preventing moisture from reaching the wall and soiling the facade. It is made of rubber that is ozone-resistant, in accordance with regulations and standards. AiSi AiSi AiSi AiSi Ø34,00 Ø6,20 12,00 Ø39,00 Ø8,00 9,00 L 39,00 WALL BRACKET Ø 6 X L WITH A SPACER - round conductor indent GZNT 01/ 80 A AiSi Item number TYPE MATERIAL 043101 GZNT 01/100 A AiSi 043102 GZNT 01/120 A AiSi 043103 GZNT 01/140 A AiSi 043104 GZNT 01/160 A AiSi 043105 AiSi EAN barcode 3858889551574 3858889551611 3858889551604 3858889551598 3858889551581 The wall bracket, type GZNT 01 / L A, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on the wall. It is composed of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm, and a spacer type GZOT 01. It is manufactured in accordance with regulations and standards. GZNT 01/80 A Cu 043106 Cu 3858889551628 AiSi AiSi AiSi AiSi L 39,00
20/2024 www.vedris.hr WALL BRACKET Ø 6 X L GZNT 02/ 80 AiSi Item number TYPE MATERIAL 046101 GZNT 02/100 AiSi 046102 GZNT 02/120 AiSi 046103 GZNT 02/140 AiSi 046104 GZNT 02/160 AiSi 046105 AiSi EAN barcode 3858889551635 3858889551673 3858889551666 3858889551659 3858889551642 WALL BRACKET Ø 6 X L - round conductor indent GZNT 02/ 80 A AiSi Item number TYPE MATERIAL 047101 GZNT 02/100 A AiSi 047102 GZNT 02/120 A AiSi 047103 GZNT 02/140 A AiSi 047104 GZNT 02/160 A AiSi 047105 AiSi EAN barcode 3858889551680 3858889551727 3858889551710 3858889551703 3858889551697 GZNT 02/80 A Cu 047106 Cu 3858889551734 WALL BRACKET with a screw Ø 6 x 60 and a plastic anchor GZNT 030 Item number TYPE MATERIAL 047151 GZNT 030 Cu 047152 GZNT 030 AiSi 047153 GZNT 030 AiSi-4 047154 FeZn Cu AiSi AiSi-4 EAN barcode 3858889554148 3858889554179 3858889554162 3858889554155 AiSi AiSi AiSi AiSi AiSi AiSi AiSi AiSi L 39,00 L 39,00 42,00 58,00 43,50 WALL BRACKET with a screw Ø 6 X 60 and a plastic anchor - round conductor indent GZNT 030 A Item number TYPE MATERIAL 047161 GZNT 030 A Cu 047162 GZNT 030 A AiSi 047163 GZNT 030 A AiSi-4 047164 FeZn Cu AiSi AiSi-4 EAN barcode 3858889554186 3858889554216 3858889554209 3858889554193 42,00 58,00 43,50 The wall bracket, type GZNT 02 / L, is intended for mounting flat conductors up to 30 mm in width on a wall. It consists of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, and one screw Ø 6 x L mm. It is manufactured in accordance with regulations and standards. The wall bracket, type GZNT 02 / L A, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on a wall. It consists of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts and one screw Ø 6 x L mm. It is manufactured in accordance with regulations and standards. The wall bracket, type GZNT 030, is intended for mounting flat conductors up to 30 mm in width on a wall. It consists of a bracket, two plates measuring 58 mm x 20 mm, two M6 screws, two M6 nuts, one screw Ø 6 x 60 mm and a plastic . It is manufactured in accordance with regulations and standards. anchor The wall bracket, type GZNT 030 A, is intended for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm on a wall. It consists of a bracket, two plates measuring 58 mm x 20 mm, two M6 screws, two M6 nuts, one screw Ø 6 x 60 mm and a . It is manufactured in accordance with regulations and standards. plastic anchor
21/2024 www.vedris.hr WALL BRACKET with a screw Ø 6 X 60 and a plastic anchor GZNT 031 Item number TYPE MATERIAL 047201 GZNT 031 Cu 047202 GZNT 031 AiSi 047203 GZNT 031 AiSi-4 047204 FeZn Cu AiSi AiSi-4 EAN barcode 3858889553387 3858889553417 3858889553400 3858889553394 64.00 43.50 BRACKET with a long M8 nut GZNT 035 AiSi Item number TYPE MATERIAL 047301 GZNT 035 AiSi-4 047302 GZNT 035 A AiSi 047303 GZNT 035 A AiSi-4 047304 AiSi AiSi-4 EAN barcode 3858889559587 3858889559600 3858889559594 3858889559617 GZNT 0 35 A-16 AiSi 047305 3858889559624 GZNT 0 35 A-16 AiSi-4 047306 AiSi-4 3858889559631 AiSi AiSi AiSi-4 BRACKET with an M 10x30 screw GZNT 037 AiSi Item number TYPE MATERIAL 047321 GZNT 037 AiSi-4 047322 GZNT 037 A AiSi 047323 GZNT 037 A AiSi-4 047324 AiSi AiSi-4 EAN barcode 3858894840809 3858894840823 3858894840816 3858894840830 GZNT 0 37 A-16 AiSi 047325 3858894840847 GZNT 0 37 A-16 AiSi-4 047326 AiSi-4 3858894840854 AiSi AiSi AiSi-4 58,00 20,00 M10X30 NEW! The wall bracket, type GZNT 031, is intended for mounting flat conductors up to 50 mm in width on a wall. It consists of a bracket, two plates measuring 80 mm x 20 mm, two M6 screws, two M6 nuts, one screw Ø 6 x 60 mm and plastic anchor. It is manufactured in accordance with regulations and standards. The bracket, type GZNT 035, is intended for mounting flat conductors up to 30 mm in width and round conductors with diameters up to Ø 16 mm. It consists of two plates measuring 58 mm x 20 mm, two M6 screws, two M6 nuts and a long M8 nut. The upper plate comes in three variants: flat, indented for a Ø 8 - Ø 12 mm round conductor or indented for a Ø 16 mm round conductor. It is manufactured in accordance with regulations and standards. The bracket, type GZNT 037, is intended for mounting flat conductors up to 30 mm in width and round conductors with a diameter up to Ø 16 mm. It consists of two plates measuring 58 mm x 20 mm, two M6 screws, two M6 nuts, and one M10 x 30 screw. The upper plate comes in three variants: flat, indented for a Ø 8 - Ø 12 mm round conductor or indented for a Ø 16 mm round conductor. It is manufactured in accordance with regulations and standards.
22/2024 www.vedris.hr WALL BRACKET FOR A ROUND CONDUCTOR Ø 8 - Ø 10 mm GZNT 01 M AiSi Item number TYPE MATERIAL 047701 GZNT 01/80 M AiSi 047702 GZNT 01/120 M AiSi 047703 GZNT 01/160 M AiSi 047704 GZNT 01 M AiSi-4 047705 AiSi - PA6 AiSi - PA6 AiSi - PA6 AiSi - PA6 AiSi-4 - PA6 EAN barcode 3858889555947 3858889555985 3858889555978 3858889555961 3858889555954 GZNT 01/80 M AiSi-4 047706 GZNT 01/120 M AiSi-4 047707 GZNT 01/160 M AiSi-4 047708 GZNT 01 M Cu 047709 GZNT 01/80 M Cu 047710 AiSi-4 - PA6 AiSi-4 - PA6 AiSi-4 - PA6 Cu - PA6 Cu - PA6 3858889555992 3858889556036 3858889556029 3858889556012 3858889556005 GZNT 01/120 M Cu 047711 GZNT 01//160 M Cu 047712 Cu - PA6 Cu - PA6 3858889556043 3858889556050 WITHOUT SCREW WITHOUT SCREW WITHOUT SCREW GZNT 04 Item number TYPE MATERIAL 049201 GZNT 04 Cu 049202 GZNT 04 AiSi 049203 GZNT 04 AiSi - 4 049204 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889552496 3858889552526 3858889552519 3858889552502 WALL BRACKET FOR A ROUND CONDUCTOR Ø 8 - Ø 10 mm 31,00 38,00 60.00 20,00 WALL BRACKET WITH AN INSULATOR GZNT 05 Cu Item number TYPE MATERIAL 049301 Cu - PE EAN barcode 3858889552472 GZNT 05 AiSi 049302 AiSi - PE 3858889552489 GZNT 05 AiSi - 4 049303 AiSi - 4 - PE 3858889552564 39,00 124,00 The wall bracket, type GZNT 01 / L M, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on a wall. It consists of a bracket, a protective cap, a spacer (made of PA6) and a screw Ø 6 x L mm. It is manufactured in accordance with regulations and standards. The wall bracket, type GZNT 04, is intended for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm directly to a wall beneath the facade. It consists of two plates, a screw Ø 6 x 60 mm and a plastic . It is manufactured in accordance with regulations and standards. anchor The wall bracket with insulator, type GZNT 05, is intended for mounting flat conductors up to 30 mm in width on wooden walls, flammable materials, or steel structures where it is necessary to divert any sparks away from the building. It consists of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm and an insulator. It is manufactured in accordance with regulations and standards.
23/2024 www.vedris.hr WALL BRACKET WITH AN INSULATOR - round conductor indent GZNT 05 A Cu Item number TYPE MATERIAL 049311 Cu - PE EAN barcode 3858889552571 GZNT 05 A AiSi 049312 AiSi - PE 3858889552588 GZNT 05 A AiSi - 4 049313 AiSi - 4 - PE 3858889552595 124,00 Ø8.00 - Ø10.00 WALL BRACKET WITH AN INSULATOR - for round conductors Ø 8 - Ø 10 mm 125,00 Ø8,00 - Ø10,00 FLAT CONDUCTOR BRACKET FOR CONCRETE BLOCKS GNBK 02 AiSi Item number TYPE MATERIAL 050101 AiSi EAN barcode 3858889552533 CONDUCTOR BRACKET FOR CONCRETE BLOCKS - round conductor indent GNBK 02 A AiSi Item number TYPE MATERIAL 051101 GNBK 02 A Cu 051102 AiSi Cu EAN barcode 3858889552540 3858889552557 39,00 25,00 85,00 39,00 25,00 85,00 GZNT 05 M Cu Item number TYPE MATERIAL 049321 Cu - PE EAN barcode 3858889552601 GZNT 05 M AiSi 049322 AiSi - PE 3858889552618 GZNT 05 M AiSi - 4 049323 AiSi - 4 - PE 3858889552625 The wall bracket with insulator, type GZNT 05 A, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on wooden walls, flammable materials, or steel structures where it is necessary to divert any sparks away from the building. It consists of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm and an insulator. It is manufactured in accordance with regulations and standards. The wall bracket with insulator, type GZNT 05 M, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on wooden walls, flammable materials, or steel structures where it is necessary to divert any sparks away from the building. It consists of a bracket, one screw Ø 6 x L mm and an insulator. It is manufactured in accordance with regulations and standards. The flat conductor bracket, type GNBK 02, is intended for mounting flat conductors up to 30 mm in width onto concrete blocks. It consists of a bracket, a plate measuring 55 mm x 25 mm, two M6 screws and two M6 nuts. It is manufactured in accordance with regulations and standards. The round conductor bracket, type GNBK 02 A, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm onto concrete blocks. It consists of a bracket, a plate measuring 55 mm x 25 mm, two M6 screws and two M6 nuts. It is manufactured in accordance with regulations and standards.
24/2024 www.vedris.hr ROUND CONDUCTOR BRACKET Ø 8 - Ø 10 mm for concrete block Item number TYPE MATERIAL GNBK 01 M Cu 052603 GNBK 01 M AiSi 052601 GNBK 01 M AiSi - 4 052602 Cu AiSi AiSi - 4 EAN barcode 3858889556197 3858889556180 3858889556203 GKNB 01 AiSi Item number TYPE MATERIAL 053101 AiSi - BETON EAN barcode 3858889552656 CONCRETE BLOCK - ROOF HOLDER CONCRETE BLOCK - ROOF HOLDER - round conductor indent Item number TYPE MATERIAL GKNB 01 A Cu 054101 GKNB 01 A AiSi 054102 Cu - BETON AiSi - BETON EAN barcode 3858889552670 3858889552663 GKNB 02 AiSi Item number TYPE MATERIAL 056101 GKNB 02 Cu 056102 AiSi - BETON Cu - BETON EAN barcode 3858889552687 3858889552694 CONCRETE BLOCK - ROOF HOLDER 39,00 60,00 145,00 140,00 39,00 60,00 145,00 140,00 140,00 80,00 60,00 The bracket, type GNBK 01 M, is intended for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm onto concrete blocks. It is manufactured in accordance with regulations and standards. The roof conductor holder, type GKNB 01, is intended for mounting flat conductors up to 30 mm in width on flat roofs. It consists of a bracket type GNBK 02, a Ø 6 mm screw and a concrete block type BK 01. It is manufactured in accordance with regulations and standards. The roof conductor holder, type GKNB 01 A, is intended for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm on flat roofs. It consists of a bracket type GNBK 02 A, a Ø 6 mm screw and a concrete block type BK 01. It is manufactured in accordance with regulations and standards. The roof conductor holder, type GKNB 02, is intended for mounting flat conductors up to 30 mm in width on flat roofs. It consists of a bracket type GZNT 02 and a concrete block type BK 01. It is manufactured in accordance with regulations and standards.
25/2024 www.vedris.hr CONCRETE BLOCK - ROOF HOLDER for round conductors Ø 8 - 10 Ø mm 140 X 140 80,00 Ø8,00 - Ø 10,00 Item number TYPE MATERIAL GKNB 01 M Cu 056603 GKNB 01 M AiSi - 4 056602 Cu - BETON AiSi - 4 - BE EAN barcode 3858889556258 3858889556265 GKNB 01 M AiSi 056601 AiSi - BETON 3858889556241 ROUND CONDUCTOR ROOF HOLDER - plastic bracket Item number TYPE MATERIAL GPNK 02 057301 GPNKB 02 057302 PP PE - AiSi EAN barcode 3858889552823 3858889552816 Item number TYPE MATERIAL GPNK 01 057201 GPNKB 01 057202 PP PE PP PE EAN barcode 3858889552809 3858889552793 FLAT CONDUCTOR ROOF HOLDER - plastic bracket PP PE - AiSi Ø148,00 68,00 77,00 Ø148,00 39,00 147,00 The roof conductor holder, type GKNB 01 M, is intended for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm on flat roofs. It consists of a bracket type GNBK 01 M, a Ø 6 mm screw and a concrete block type BK 01. It is manufactured in accordance with regulations and standards. The roof holder, type GPNK 01, is designed for mounting round conductors with diameters ranging from Ø 8 to Ø 10 mm. It consists of a plastic bracket and a cover with a diameter of Ø 148 mm. It can be easily filled with loose materials (such as sand and gravel) available at any construction site. We can provide it pre-filled with concrete, in which case it is labeled as GPNKB 01. It is manufactured in accordance with regulations and standards. The roof holder, type GPNK 02, is intended for mounting flat conductors up to 30 mm in width. It consists of a plastic bracket type GPNK 01 and a bracket type GNBK 02. It can be easily filled with loose materials (such as sand and gravel) available at any construction site. We can provide it pre-filled with concrete, in which case it is labeled as GPNKB 02. It is manufactured in accordance with regulations and standards.
vedris.comRkJQdWJsaXNoZXIy Mjc2NzM=