11/2024 www.vedris.hr GS 01 Item number TYPE MATERIAL 027101 GS 01 Cu 027102 GS 01 AiSi 027103 GS 01 AiSi - 4 027104 GS 01 K 027105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550881 CONNECTOR 58X25/3 plates 3858889550928 3858889550911 3858889550904 3858889550898 CONNECTOR 58X25/3 plates - round conductor indent GS 01 A Item number TYPE MATERIAL 028101 GS 01 A Cu 028102 GS 01 A AiSi 028103 GS 01 A AiSi - 4 028104 GS 01 A K 028105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889550935 3858889550973 3858889550966 3858889550959 3858889550942 CONNECTOR 58X25/2 plates GS 01/2 Item number TYPE MATERIAL 029101 GS 01/2 Cu 029102 GS 01/2 AiSi 029103 GS 01/2 AiSi - 4 029104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889550980 3858889551017 3858889551000 3858889550997 42,00 58,00 25,00 42,00 58,00 25,00 42,00 58,00 25,00 CONNECTOR 58X25 A / 45° - 45° angle round conductor indent GS 01 A / 45 Item number TYPE MATERIAL 028151 GS 01 A / 45 Cu ° 028152 GS 01 A / 45 AiSi ° 028153 GS 01 A / 45 AiSi - 4 ° 028154 GS 01 A / 45 K ° 028155 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889559495 3858889559532 3858889559525 3858889559518 3858889559501 ° The connector, type GS 01, is intended for contact connection of flat conductors up to 35 mm in width. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01 A, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01 A / 45°, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm at a 45° angle. It consists of three plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01/2, is intended for contact connection of flat conductors up to 35 mm in width. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
RkJQdWJsaXNoZXIy Mjc2NzM=