12/2024 www.vedris.hr GS 02 Item number TYPE MATERIAL 031101 GS 02 Cu 031102 GS 02 AiSi 031103 GS 02 AiSi - 4 031104 GS 02 K 031105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551062 CONNECTOR 48X20/3 plates 3858889551109 3858889551093 3858889551086 3858889551079 CONNECTOR 48X20/3 plates - round conductor indent GS 02 A Item number TYPE MATERIAL 032101 GS 02 A Cu 032102 GS 02 A AiSi 032103 GS 02 A AiSi - 4 032104 GS 02 A K 032105 Fe Zn Cu AiSi AiSi - 4 AiSi-AiSi-Cu EAN barcode 3858889551116 3858889551154 3858889551147 3858889551130 3858889551123 20,00 32,00 48,00 32,00 48,00 20,00 CONNECTOR 58X25/2 plates - round conductor indent GS 01/2 A Item number TYPE MATERIAL 030101 GS 01/2 A Cu 030102 GS 01/2 A AiSi 030103 GS 01/2 A AiSi - 4 030104 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889551024 3858889551055 3858889551048 3858889551031 42,00 58,00 25,00 CONNECTOR 58X25/2 A / 45° - 45° angle round conductor indent GS 01/2 A / 45° Item number TYPE MATERIAL 030151 GS 01/2 A / 45° Cu 030152 GS 01/2 A / 45° AiSi 030153 GS 01/2 A / 45° AiSi - 4 030154 Fe Zn Cu AiSi AiSi - 4 EAN barcode 3858889559549 3858889559570 3858889559563 3858889559556 The connector, type GS 01/2 A, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 01/2 A / 45°, is intended for contact connection of flat conductors up to 35 mm in width and round conductors with diameters ranging from Ø 8 to Ø 12 mm at a 45° angle. It consists of two plates with dimensions of 58 mm x 25 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 02, is intended for contact connection of flat conductors up to 25 mm in width. It consists of three plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards. The connector, type GS 02 A, is intended for contact connection of flat conductors up to 25 mm in width and round conductors with diameters ranging from Ø 8 to Ø 10 mm. It consists of three plates with dimensions of 48 mm x 20 mm, two M6 screws, and two M6 nuts. It is manufactured in accordance with regulations and standards.
RkJQdWJsaXNoZXIy Mjc2NzM=