19/2024 www.vedris.hr SPACER Item number TYPE MATERIAL GZOT 01 Cu 041101 GZOT 01 AiSi 041102 GZOT 01 AiSi - 4 041103 Cu AiSi AiSi - 4 EAN barcode 3858889551505 3858889551499 3858889551482 WALL BRACKET Ø 6 X L WITH A SPACER GZNT 01/ 80 AiSi Item number TYPE MATERIAL 042101 GZNT 01/100 AiSi 042102 GZNT 01/120 AiSi 042103 GZNT 01/140 AiSi 042104 GZNT 01/160 AiSi 042105 AiSi EAN barcode 3858889551529 3858889551567 3858889551550 3858889551543 3858889551536 The spacer, type GZOT 01, is intended for mounting flat conductors vertically on concrete or wooden surfaces. It has an outer diameter of Ø 34 mm with a hole diameter of Ø 6.2 mm and a height of 12 mm. It is also used as a spacer on wall brackets. It is manufactured in accordance with regulations and standards. The wall bracket, type GZNT 01 / L, is intended for mounting flat conductors with a width of up to 30 mm on the wall. It is composed of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm, and a spacer type GZOT 01. It is manufactured in accordance with regulations and standards. RUBBER CAP - for round conductors with a diameter Ø 8 mm Item number TYPE MATERIAL GOP 01 041401 GUMA EAN barcode 3858889551512 The rubber cap, type GOP 01, is intended for mounting on a round conductor with a diameter of Ø 8 mm before entering the wall to prevent water from flowing along the conductor, thus preventing moisture from reaching the wall and soiling the facade. It is made of rubber that is ozone-resistant, in accordance with regulations and standards. AiSi AiSi AiSi AiSi Ø34,00 Ø6,20 12,00 Ø39,00 Ø8,00 9,00 L 39,00 WALL BRACKET Ø 6 X L WITH A SPACER - round conductor indent GZNT 01/ 80 A AiSi Item number TYPE MATERIAL 043101 GZNT 01/100 A AiSi 043102 GZNT 01/120 A AiSi 043103 GZNT 01/140 A AiSi 043104 GZNT 01/160 A AiSi 043105 AiSi EAN barcode 3858889551574 3858889551611 3858889551604 3858889551598 3858889551581 The wall bracket, type GZNT 01 / L A, is intended for mounting round conductors with diameters ranging from Ø8 to Ø10 mm on the wall. It is composed of two plates measuring 55 mm x 25 mm, two M6 screws, two M6 nuts, one screw Ø 6 x L mm, and a spacer type GZOT 01. It is manufactured in accordance with regulations and standards. GZNT 01/80 A Cu 043106 Cu 3858889551628 AiSi AiSi AiSi AiSi L 39,00
RkJQdWJsaXNoZXIy Mjc2NzM=