Lightning protection and electrical accessories
Category Lightning protection and electrical accessories
Our products are standard and can be viewed here and in the PDF catalog. In the case of a specific need, we can meet the customer and make various supports according to the design, which are not of the standard type.
We have our own tool shop and we work on the tool and product development process ourselves. We provide customers with support from the very planning and procurement to the use of our products.
Roof support rod gripper
The GKNS 35 type GKNS 35 roof bracket is intended for mounting the pole on the ridge of the roof.…
Lightning protection and electrical accessories
READ MOREROOF BRACKET - for a round conductor with a diameter of Ø 8 - Ø 10 mm
The roof support type GKNC 17 M - UNIVERSAL is intended for mounting a round conductor with a…
Lightning protection and electrical accessories
READ MOREBRACKET with long nut M8
The bracket type GZNT 035 is intended for mounting flat conductors up to 30 mm wide and round…
Lightning protection and electrical accessories
READ MOREINSULATED SPACER ROD GRIP FOR ANTENNA POLE
The insulated spacer type GKNS - IOAS with a length of 100 - 300 mm is used for mounting and…
Lightning protection and electrical accessories
READ MOREINSULATED SPACER ROD GRIP
The isolated wall spacer type GKNS - IOSH with a length of 500 - 1000 mm is used to stiffen and…
Lightning protection and electrical accessories
READ MORERoof support rod gripper
The GKNS 34 type GKNS 34 roof bracket is intended for installing the rod grip on the roof ridge. It…
Lightning protection and electrical accessories
READ MOREWALL SPACER ROD GRIP
The wall spacer type GKNS - ZOSH with a length of 500 - 1000 mm is used to surround the stick…
Lightning protection and electrical accessories
READ MOREINSULATED WALL BRACKET ROD GRIP
Wall-mounted insulated support type GKNS - ZIOSH with a length of 500 - 1000 mm is used for…
Lightning protection and electrical accessories
READ MOREROD GRIP with connector for tape and round guide with a diameter of Ø 8 - Ø 10 mm
Štapna hvataljka tip GKNS - SH namijenjena je za zaštitu raznih istaknutih dijelova na krovu,…
Lightning protection and electrical accessories
READ MORERoof support rod gripper
The GKNS 33 type roof support for the rod gripper is intended for mounting the rod gripper on the…
Lightning protection and electrical accessories
READ MOREThe tilting base of the stick gripper
The tilting stand type GKNC - NP with M10 and M16 thread is intended for mounting a rod gripper on…
Lightning protection and electrical accessories
READ MOREPlastic base - round
Plastic base - round type GKNS - PP 01 is used as a pad for a round concrete base. It is made…
Lightning protection and electrical accessories
READ MORESide stiffened stick grips
The lateral stiffener of the GKNS - BU rod grab is intended for additional anchoring of the GKNS 10…
Lightning protection and electrical accessories
READ MORECOUPLER 58X25/2 A / 45° - imprint for a round conductor at an angle of 45°
The connector type GS 01/2 A / 45° is intended for the contact connection of a flat conductor with…
Lightning protection and electrical accessories
READ MORECOUPLER 58X25 A / 45° - imprint for a round conductor at an angle of 45°
The connector type GS 01 A / 45° is intended for the contact connection of a flat conductor with a…
Lightning protection and electrical accessories
READ MORECOUPLING FOR ROUND GUIDE DIAMETER Ø 8 mm - Ø 10 mm
The connector type GKS 045 is intended for connecting round conductors with a diameter of Ø 8mm - Ø…
Lightning protection and electrical accessories
READ MOREMUSHROOM ROOF GRIP
Roof protective mushroom GKNS 21 is used for lightning protection of multi-storey roofs of garages…
Lightning protection and electrical accessories
READ MORESHELNA FOR ROUND DIAMETER ABOVE Ø 60 mm
The universal joint US is installed on supports, spacers and insulated spacers where they need to…
Lightning protection and electrical accessories
READ MOREWALL BRACKET STICK GRIP 50
The wall bracket type GKNS - ZNSH with a length of 150 - 300 mm is used for mounting the rod…
Lightning protection and electrical accessories
READ MOREWALL BRACKET OF STICK GRIP 35
The wall bracket type GKNS - ZNSH with a length of 150 - 300 mm is used for mounting the rod…
Lightning protection and electrical accessories
READ MOREWALL BRACKET OF STICK GRIP 25
The wall bracket type GKNS - ZNSH with a length of 150 - 300 mm is used for mounting the rod…
Lightning protection and electrical accessories
READ MOREWALL MOUNT FOR ROD HOLDER 16
Zidni nosač tip GKNS - ZNSH duljine od 150 - 300 mm koristi se za montažu štapne hvataljke na zid…
Lightning protection and electrical accessories
READ MORETILT STAND OF STICK GRIP
The tilting stand type GKNS - NPPL with M10 and M16 thread is intended for the mounting of a rod…
Lightning protection and electrical accessories
READ MORE
